![]() When it does it decodes it, tells me the decoded number, bits, and protocol. If you look closely you can see a good example of one of those two colour OLEDs.Īnd no, you cant specify the colour, its the way they are built. Kind of looks like an alien with the two antenna out the top Controls are equally simple. While all the Arduino parts fit, its the battery (a single 9V) that uses all the room. I think it might be because the MINI Pro has no UARTUSB interface on it. Interestingly, the compiled code on the UNO is 23K, whereas on the Pro MINI, its 18K. The single drawback to them is they only run off 3.3V.īut I had some 3.3V power boards that are quite small so I used one for the power. Well, I had to add some case spacers eventually but it all worked. I figured I could put in a small display, Arduino MINI, the RX and TX, some switches, and maybe, a battery (9V). The usual, start big, downsize to make it work syndrome. My starting list of what I wanted it to do was, as usual, more elaborate than what I was going to end up with.Īgain, as usual. Turn them on as you approach the truck and they light up the ground around the truck.īut we had some issues with the RF mounted in the engine compartment that still havent been resolved at this point (on the todo list), but I wanted to check out the remotes. Using the library has saved me countless hours of time souse it, its worth it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |